Follow Us!

NAB 2019: Flowcine Steadicam Arm Mounts

NAB 2019: Flowcine Steadicam Arm Mounts

Marcus Larrazabal from 16X9 talks about their new collaboration with FLOWCINE, the XPEG, which promises to be an easy to use multifunctioning mount to be used with any Inovativ cart.

FLOWCINE XPEG – $148

image-25891

The xPEG allows the xArm or Steadicam operator to easily attach their arm to any kind of Inovativ cart (currently Apollo, Echo, Scout and Ranger type of carts).

The xPEG has 3M Bumpon™ surface on all contact points to avoid scratching your cart and a internal spring mechanism + adjustable lever, making very easy to take on/off from the cart.

FLOWCINE XPEG RIP TIE – $148

image-25892

The xPEG allows the xArm or Steadicam operator to securely fasten the arm at the bottom shelf of the Inovativ cart

The xPEG Rip-Tie is equipped with rubber tip and a 12” long premium Rip-tie CinchStrap that easily allows you to strap the lower portion of your arm to the cart, avoiding any kind of dents, bumps or scratches on your arm. The xPEG Rip-Tie has 3M Bumpon™ surface on all contact points to avoid scratching your cart and a internal spring mechanism + adjustable lever, making very easy to take on/off from the cart. As the xPEG Rip-Tie has a CinchStrap attached to it, you can also use it to hold cables or similar items. The xPEG Rip-Tie also comes with a ⅜”-16 UNC threaded hole, if the user wishes to mount anything else on it (such as a eyebolt, for example).

FLOWCINE EZPEG – $189

image-25893

The ezPeg is an attachment for your cart, where you can hang your Easyrig while not in use.

The ezPEG allows the camera operator to easily attach your Easyrig 2.5, Cinema 3 to your Inovativ cart (currently Apollo, Echo, Scout and Ranger type of carts). Simply attach the Easyrig sleeve on the top support bar right over the bellow, and then you’ll be able to hang the Easyrig off the ezPEG on any side of your cart. The ezPEG has 3M Bumpon™ surface on all contact points to avoid scratching your cart, and a internal spring mechanism with adjustable lever, making very easy to take the peg on/off from the cart.

All of these are available now on their website at http://www.16x9inc.com/shop/flowcine-xpeg.html

 

 

 

 

*Filmed with the Blackmagic Pocket Cinema Camera 4k and Carl Zeiss Light Weight Zoom

TOP